Pulsarlube EXPL - Electromechanical battery lubricator with ATEX certificate, for areas with risk of explosion - Capacity 240 ml
Specifiche tecniche
Pulsarlube EXPL - Electromechanical battery lubricator with ATEX certificate, for areas with risk of explosion - Capacity 240 ml
It is designed primarily to meet the following requirements: UL79, electrically driven pumps for oil supply products, 8th Edition ANSI / ISA-12.12.01-2000, combustion-proof electrical material for Class I and II, Division 2 and Class III, Division 1 and 2 areas dangerous.
The circuits and particles of the Pulsarlube EX are effective based on the energy limit, adopting an explosion-proof and anti-spark structure that gives electric power to work in water under normal or exceptional conditions.
Features & Benefits
- Applicable to electric motors as well as to other types of equipment classified as devices allocated to hazardous locations.
- Tested by Underwriter Laboratories, meets the following requirements: UL79, electrically driven pumps for oil supply products.
- Certification: Class I, Div. 2, Groups C and D. Where flammable gases or vapors are present in the air in sufficient quantities to produce explosive or flammable mixtures.
- Convenient thanks to the use of replaceable grease cartridges and replaceable batteries.
- Available grease cartridges: 60, 120, 240, 480 ml.
- Delivery periods available: 1, 2, 3, 6, 12 and a half (H) months.
Technical data
| Technical specifications | Description |
|---|---|
| Grease cartridges | 60, 120, 240, 480 ml (replaceable) |
| Maximum operating pressure | Max. 15kgf / cm² (200psi) |
| Operating temperature range | - 15 ° C ~ 60 ° C (5 ° F ~ 140 ° F) * with the Standard Alkaline Battery Pack |
| Power | DC 4.5V Battery Pack (replaceable) |
| Settable delivery periods | 1, 2, 3, 6, 12 and a half months |
| Delivery volume (cc / pump cycle) | Approx. 0.34cc / cycle @ 20 ° C |
| Size of the grease gun | 125 ml: Ø91 mm (3.6 ") x 183 mm (7.2") 250 ml: Ø91 mm (3.6 ") x 210 mm (8.2") 125 ml: 860 g (1.89 lb) 250 ml: 1.050 g (2.31 lb) |
| Certifications / IP code | UL / ATEX / IP54 |
| Multi-line lubrication (in more places) | Not available (only lubrication is available on a single point) |
| Remote (remote) installation | up to 3 meters (10 ft) with a 6mm (1/4 ") pre-filled line |
| Thread size for installation | 3/8 "Male BSPT (NPT Converter Available) |
Certifications
| Certification | UL | ATEX | KTL |
|---|---|---|---|
| Rating | Class l Division 2 Groups C.D | EEx nL IIB T5 IP54 | Ex nL IIB T5 IP54 |
| Gas Groups | D-C1 l Div 1/2 | IIA | IIA |
| Maximum Surface Temperature | T6 (85°C) | T5 (100°C) | T5 (100°C) |
| Enclosure Protection Indices | - | IP54 | IP54 |
| Classification of Hazardous Locations | Cl l Div2 Cl l Zone2 (gas) |
Zone2 (gas) zone22 (dust) |
- |
| Certificate Number | E304815 | LCIE 07 ATEX 6100X |
12-KB2BO-0279X |
The Pulsarlube EX is considered and certified by UL (USA), ATEX (Europe), and KTL (Korea). Refer to the table above when the evaluation is looking for an automatic lubricator for use in hazardous areas.
Danger of explosion - Do not consult or replace batteries unless the power supply is disconnected from the area without flammable gas or vapor concentrations.
This appliance is suitable for use in Class I, Division 2, Group C and D hazardous or non-hazardous environments.