Pulsarlube V - Electrochemical lubricator (Nitrogen charge) with 6 different adjustment possibilities and LCD display - Capacity 125 cc - With Multi purpose grease (pack of 10 pieces)
Specifiche tecniche
Pulsarlube V - Electrochemical lubricator (Nitrogen charge) with 6 different adjustment possibilities and LCD display - Capacity 125 cc - With Multi purpose grease
The Pulsarlube V automatic lubricator works thanks to an electrochemical reaction that generates an inert gas (Nitrogen - N2) through the use of an electrolyte and electric energy.
It is designed to allow users to easily set the dispensing rate using a microprocessor and an LCD display.
The Pulsarlube V controls the electrolytic reaction for the best delivery rate and delivers a precise amount of grease at the set speed.
It is suitable for industrial applications.
This product is an intrinsically safe product, certified as Ex ia IIC T4 for use in hazardous areas.
| Technical specifications | Description |
|---|---|
| Type of gas | Nitrogen(N2) gas |
| Gas generation method | Electrochemical |
| Capacity of the greaser | 250 ml |
| Maximum operating pressure | 5kgf/cm² (70psi) |
| Operating temperature range | -20°C ~ 55°C ( -4°F~131°F) |
| Settlement periods of | 1, 3, 6, 9 e 12 months |
| Grease size | 60ml : Ø77mm(3.03") x 92mm (3.62") 120ml : Ø77mm(3.03") x112mm (4.41") 240ml : Ø77mm(3.03") x157mm (6.18") |
| Certifications / IP codes | Ex ia IIC T4 / IP68 |
| Remote installation | Up to 1m (3ft) with a pre-filled lubricant line of 8mm (5/16 ") O.D. |
| Thread size for installation | 3/8 "Male BSPT (NPT Converter Available) |
Pulsarlube Standard / multipurpose grease (PL1)
PL1 multi-purpose grease is a product specially designed for long-term use under the constant pressure of single-point automatic grease guns.
It is based on complex lithium soap and formulated with high-quality mineral-based oil and performance additives, suitable for use in a wide range of applications.
PL1 multi-purpose grease offers high melt stability, low oil separation and low curing tendency to ensure re-lubrication intervals are extended, reducing lubrication costs, and improving performance and safe operation of products.
Applications
PL1 multi-purpose grease is suitable for multi-purpose use where temperatures are average and / or the speed range is wide.
It is also suitable for use in extreme pressure applications and offers good resistance to water and dust.
- Transport systems for handling materials such as coal, iron and limestone minerals
- Electric engines
- Pumps
- Vacuum cleaners and fans
Advantages
- Long duration
- Stability, reversibility and low oil separation guarantee a long fat life
- Excellent anti-wear and heavy-duty capacity
- Extend the life of the equipment
- Advanced protection against rust and corrosion
- Mechanically stable
- Extremely mobile and resistant to pressurized spills
- Excellent oxidation stability
- Operating temperature: -20 ° C ~ 150 ° C